Adjust Your Water Heater Temperature

Should You Adjust Your Water Heater Temperature?

Adjust Your Water Heater Temperature

  • Seattle, Wa

Should You Adjust Your Water Heater Temperature?

Should You Adjust Your Water Heater Temperature?

If you live in Seattle, you know that hot water is a must, especially during the winter months. However, do you know what temperature your water heater is set at? Most homeowners don’t think about it, but adjusting the temperature of your water heater can not only save you money on your energy bills but also prevent scalding accidents. In this blog post, we’ll discuss whether you should adjust your water heater temperature or leave it as is.

What is the recommended temperature for a water heater?

The recommended temperature for a water heater is 120 degrees Fahrenheit. This temperature is hot enough to kill bacteria but not hot enough to cause scalding. However, most water heaters come set at a higher temperature, usually around 140 degrees Fahrenheit. This higher temperature can not only cause scalding but also waste energy as the water heater has to constantly heat the water.

Reasons to adjust your water heater temperature

  1. Save money on energy bills.

As mentioned earlier, setting your water heater temperature to 120 degrees Fahrenheit can save you money on your energy bills. This is because the water heater doesn’t have to work as hard to maintain the lower temperature, resulting in lower energy consumption.

2. Prevent scalding accidents

Setting your water heater temperature to 120 degrees Fahrenheit instead of the default 140 degrees Fahrenheit can prevent scalding accidents. Scalding accidents can happen when the water is too hot and can cause serious burns, especially for children and the elderly.

3. Extend the life of your water heater

Lowering the temperature of your water heater can also extend its lifespan. When the water temperature is too high, it can cause mineral buildup inside the water heater, which can lead to corrosion and eventually a shorter lifespan for your water heater.

Reasons not to adjust your water heater temperature

1. Risk of legionella bacteria

Legionella bacteria can grow in water that is not hot enough. At 120 degrees Fahrenheit, hot water can kill the bacteria, but if the temperature is lowered, it can increase the risk of bacteria growth.

2. Hot water not hot enough

Lowering the temperature of your water heater can result in the hot water not being hot enough for your needs, especially during the winter months. If you decide to lower the temperature, make sure to test the hot water to ensure it’s still hot enough for your daily needs.

How to adjust your water heater temperature

Adjusting the temperature of your water heater is a simple task. First, turn off the power supply or gas to the water heater. Then, locate the thermostat and adjust it to the desired temperature, usually 120 degrees Fahrenheit. Finally, turn the power or gas back on and wait for the water heater to heat up.

In conclusion, adjusting your water heater temperature can be beneficial in many ways, including saving money on energy bills and preventing scalding accidents. However, there are some risks to lowering the temperature, such as the risk of legionella bacteria, and the hot water not being hot enough for your needs. Before making any changes, it’s important to weigh the pros and cons and make an informed decision. If you decide to adjust the temperature, make sure to follow the proper steps and precautions to ensure the safety and efficiency of your water heater.

Signs Of Water Heater Replacement

Signs Of Water Heater Replacement

Signs Of Water Heater Replacement

  • Seattle, Wa

What Are the Signs That You Need to Replace Your Water Heater?

A water heater is an essential appliance in every home. But like all appliances, it won’t last forever. If you live in Seattle and have an older model water heater, you should be aware of the signs that indicate it’s time for a replacement. In this blog post, we will discuss the different signs that you need to replace your water heater and why it might be time to upgrade your model.

First, let’s look at some of the common signs that indicate you should replace your water heater.

One of the most common indicators is if you hear loud banging or popping noises coming from your water heater when it turns on. These noises are caused by sediment buildup inside the tank and are a sure sign that the unit needs to be replaced. Another indication is if you notice rusty-colored water coming out of your taps. This could mean that there is corrosion inside the tank, which can lead to serious problems down the line if left unchecked. Finally, if your hot water supply runs out quickly or doesn’t seem to heat up as much as it used to, then it might be time for a new unit.

Another reason why you may want to consider replacing your existing water heater with a newer model is that newer models tend to be more efficient than older ones. With today’s advanced technology, modern models are designed with efficiency in mind so they use less energy while still providing plenty of hot water for all your needs. Older models often have inefficient designs which end up costing homeowners more money on their monthly energy bills in addition to having shorter lifespans than their modern counterparts. By buying a newer model with more efficient technology, not only will you save money on energy costs but also get more years out of the appliance before needing another replacement water heater!

Signs of Poor Water Heater Performance

One of the most common signs that you need to replace your water heater is poor performance. If you notice that it takes longer than normal for your hot water to come on or that there is not enough hot water available for use in your home, then these are signs that something may be wrong with your unit. You should also pay attention to fluctuations in temperature or pressure when using hot water; if either of these things happen during use, then it could be a sign that your system needs to be replaced.

Your Water Heater Has Excessive Rusting and Corrosion

Another sign that you need a new water heater is excessive rusting or corrosion on the outside of the tank or around fittings and valves. This can be caused by age-related wear and tear on older models as well as defects in newer models. If you notice any rusting or corrosion on the water heater itself, then it may be time to replace it before further damage occurs.

Strange Noises Coming From Your Water Heater 

If you hear strange noises coming from your water heater such as banging, knocking, or clicking sounds, then this could mean a few different things including an issue with sediment buildup in the tank which can cause damage over time if left unaddressed. It could also mean that there is a leak somewhere in the unit which could lead to more serious problems if not dealt with promptly. In either case, if you hear odd noises coming from your water heater then it’s time to call a professional for inspection and possible water heater replacement.

Signs Of Water Heater Replacement
Water Heater Replacement Seattle

Contact Us Today!

If you live in Seattle with an older model water heater and are noticing any of these signs mentioned above—loud banging sounds when running, rusty-colored hot water coming out of faucets or running out quickly—you should strongly consider replacing it with a new one soon! Modern models provide superior efficiency compared to older units while using less energy so they can help reduce your monthly bill while lasting longer than their predecessors. Don’t ignore these warning signs; contact a professional plumber today who can advise on how best to upgrade your system!